512-255-7633

X3 CONTROLLER

The X-3 controller is part of Intelight’s award winning X-Series NEMA controller line. The X-3 meets and exceeds the current ATC, NEMA and NTCIP standards providing agencies with a robust, industry-leading, true open architecture hardware platform.

The X-3 can help agencies organize and improve operations and reduce the
amount of equipment in the signal cabinet. Contact Intelight today to see how the X-3 Controller can help update your signal operations system to 21st century technology.

Benefits

• Compliant with NEMA TS-2 and ATC 5201 and 5401
Standards
• Linux operating system
• Two independent 10/100 Mbit network cards
• TS-1 and/or TS-2 operation (requires type 2) • Supports serial and/or Ethernet communications • 2070 hardware expansion bay for device integration
• MaxTime local controller software

  • 40 phases, 16 rings, 32 overlaps, 16 preempts

  • Monitor and configure timings wirelessly from a

    laptop, tablet or smartphone without database

    editor or third party software

  • Built-in master/closed loop functionality

  • Peer-to-peer communications

  • Advanced TSP included

On-board Web Server

Secure, modern communications for traffic operators to access
controller functions wirelessly or via wired Ethernet connections
from any internet-enabled device (smart phone, tablet, laptop).
• 40 phases, 16 rings, 32 overlaps, 16 preempts
• HTTPS communication between device and
MAXVIEW central system
• Advanced functionality comes standard
– Master/closed loop
– Peer-to-peer communications
– Transit signal priority

Product Specifications

MODERN PLATFORM

Supported standard specifications:

  • ATC 5201 (v6.24)
  • ATC 5401 (v2.17) API (FIO & FP interface)
  • NEMA TS2 with NTCIP (type 1 & type 2)
  • NTCIP – 1202 ASC, 1201 and base standards
  • NTCIP – 1210 master control

ROBUST HARDWARE

  • Built with current, industry-standard technology
  • Compliant with NEMA environmental requirements
    • Temp range: -40°C to +80°C
    • TS-2 Type 1 Size: 8 ½”H x 8 ½”D x 14 ¾”L
    • TS-2 Type 2 Size: 10 3/8 ”H x 8 ½”D x 14 ¾”L
    • Variable power supply (95-250 VAC 50/60 Hz auto sensing)

PROCESSING AND MEMORY

  • Motorola PowerPC 8248 32-bit (750 MIPS at 400 MHz) processor
  • (64MB flash / 64MB DRAM)

COMMUNICATION AND INTERFACES

  • Two independent network adapters
  • 4 10/100 Mbit ports on controller front panel (subnet 2)
  • 4 10/100 Mbit ports on CPU module (see figure below)
  • Three-port USB hub (front panel) + CPU USB
  • Six config. serial ports (5 are SDLC capable)
  • ATC/2070 comm./modem slot
  • Optional 2070-6A/B, 2070-7A/B modules
  • Optional 2070-7T w/GPS time clock module

INDUSTRY STANDARDS

  • ATC 5201, current
  • ATC API 5401
  • NEMA TS 2-2003 v2.06
  • NTCIP – 1201, 1202, and applicable base standards

OPTIONS

  • Datakey receptacle
  • Connected vehicle (CV) processor
  • 12 or 24 VDC power supply

FORM FACTOR

Shelf or Rack Mount

DIMENSIONS

Rack Mount
6.9” x 7.5” x 18.8”

Shelf Mount
7.0” x 7.5” x 13.5”

POWER

Variable power supply (89-250 VAC 50/60 Hz, or 48VDC)

POWER CONNECTOR

Standard NEMA Type 1 ‘A’

TEMPERATURE

-40°C to +80°C